Steam water heat exchanger

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water. Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, etc.

Online inquiry

上一产品 : 没有了

下一产品 : low pressure heater

Content details

Overview of HR high water and steam water heat exchangers:

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, so that the heated water reaches the required temperature. This series of heat exchangers is mainly used for the recovery of industrial waste steam, wastewater and waste heat from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

HR high water and steam water heat exchangers are mainly used for the recovery of industrial waste steam and wastewater from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

-Special specifications can be arranged separately according to user needs for design schemes! Interested parties contact us!

Notes on ordering HR high water and steam water heat exchangers:

a. When ordering equipment, it is necessary to indicate in the contract whether accessories are required. If not specified, it will be considered as not equipped with accessories and only for the main body

b. The parameters listed in the table are for reference only, and can be designed and adjusted according to specific user requirements during ordering

HR High Type Water and Steam Water Heat Exchanger Technology -:

项目\型号规格		HR-10	HR-20	HR-35	HR-50	HR-80
管程（被加热水侧）	工作压力MPa	0.588
	工作压力MPa	0.588
	设计温度℃	100
	进/出口温度℃	40/50
	流量t/h	50	100	200	300	400
壳程（加热水侧）	设计压力MPa	0.588
	工作压力MPa	0.02
	设计温度℃	200
	进/出口温度℃	104
不锈钢管换热管	不锈钢管材质	304
	不锈钢管规格	Φ16×1
	不锈钢管长度	1585
换热面积m²		10	20	35	50	80
设备-量t/h		750	919	1334	1836	2617

HR高-型水水,汽水热交换器主要接管表：

序号	型号规格	被加热水-A	被加热水-B	被加热水-C	被加热水-D
1	HR-10	PN1.0　DN80	PN1.0　DN80	PN1.0　DN65	PN1.0　DN65
2	HR-20	PN1.0　DN100	PN1.0　DN100	PN1.0　DN80	PN1.0　DN80
3	HR-35	PN1.0　DN150	PN1.0　DN150	PN1.0　DN100	PN1.0　DN100
4	HR-50	PN1.0　DN200	PN1.0　DN200	PN1.0　DN150	PN1.0　DN150
5	HR-80	PN1.0　DN250	PN1.0　DN250	PN1.0　DN150	PN1.0　DN150

HR高-型水水,汽水热交换器设备附件：

对应型号设备附件参数		HR-10	HR-20	HR-35	HR-50	HR-80
压力表	Y-100，Φ100	P0.245　2.5-
压力表	数量	1	1	1	1	1
截止阀	J11T-16	PN1.57　DN15
截止阀	数量	2	2	2	2	2