micropore muffler

Introduction to Small Hole Silencers:

A small hole muffler is a device that controls the external transmission of aerodynamic noise. After internal acoustic treatment, it can greatly reduce the generation and transmission of noise without affecting the airflow. After installing the muffler, the noise reduction of the equipment should reach 10-30dB (A), and the subjective perceived loudness should be reduced by 50-90%.

Silencer type:

1. Silencers have the advantages of absorbing high-frequency sound, simple processing and manufacturing, and are generally used for noise reduction in fan types such as air conditioning fans, compressors, gas turbines, and blowers.

2. Anti muffler has strong targeting, low-frequency sound absorption effect, and does not require sound absorption materials, etc- It can only be used for small pipe exhaust noise reduction, such as for automobiles, ships, diesel engines, etc.

3. Impedance type mufflers have a wide noise reduction frequency band and are suitable for safety purposes. Mainly used for noise reduction with high sound but low frequency broadband noise. Such as steam turbines, deaerator, expansion vessels, small displacement safety valve exhaust, etc.

4. A small hole muffler has low frequency broadband noise reduction energy, a small aperture can improve the sound absorption coefficient, a low porosity can increase the width of the sound absorption frequency band, and an orifice plate can change the position of the resonant sound absorption peak. Small hole silencers have strict design, wide absorption frequency band, low resistance loss, high temperature, and long length- Commonly used for exhaust and venting of high-pressure equipment such as boilers and compressors.

5. The anti spray resistance composite muffler has a wide noise reduction frequency band, a wide range of applications, a large noise reduction amount, high temperature and high pressure, and is not afraid of water vapor and oil mist. It was developed based on the theory of small hole injection noise reduction proposed by renowned scholar Ma Dayou, and is also commonly used in various power plants as a type of exhaust muffler.

6. The through-hole dissipative muffler has advantages such as smooth exhaust, high temperature, and strong anti-interference- Commonly used for exhaust noise reduction in safety valves, exhaust valves, steam turbines, and blow pipes.

There are two aspects to the performance of a muffler:

-It's pneumatic energy, and the second is noise reduction energy. The pressure loss of the muffler must be within the allowable limit range, and secondly, it must meet the requirements of the noise standard. So when choosing a muffler, it is important to consider both pneumatic and acoustic energy, both of which are indispensable.

Silencer usage and selection method:

1. For the selection of fan type silencers, users should submit the type of fan (including blower, ventilation fan, Roots fan, axial flow fan, air compressor, etc.), and provide the size and air volume of the fan inlet and outlet. Generally, fan silencers are installed at the outlet, and fan silencers should be reasonable, that is, they should be installed together with the soundproof room. The shell of the fan muffler is made of carbon steel, and the internal materials are divided into two types: aluminum plate and stainless steel. Users can choose according to the cost situation.

2. Boiler steam emission type mufflers can be purchased through the selection of small hole mufflers and composite mufflers. Users should provide hourly emissions, exhaust outlet size, exhaust temperature and pressure. Exhaust muffler - generally choose anti spray resistance composite muffler. The shell of this muffler is made of carbon steel, and the connecting pipe and internal material are made of stainless steel. It has a wide noise reduction frequency band, a wide range of use, a large noise reduction amount, high temperature and high pressure, and is not afraid of water vapor and oil mist. Small hole injection type silencers can also be used, usually made of all stainless steel.

3. Blow pipe silencer - suitable for poor working environment, working medium - can contain water, iron impurities (particle size can reach less than 30mm), engineering materials, etc. Users should provide emissions, exhaust outlet size, exhaust temperature, and unit model when purchasing. Blow pipe silencers generally use through-hole dissipative silencers. The connecting pipe and outer shell of the silencer are made of carbon steel, and the internal material of the soundproof plate is stainless steel. This type of silencer is generally for secondary use, and can also be designed for secondary use according to user requirements.

4. Safety valve exhaust is a type of instantaneous natural emission. When designing safety valve silencers, consideration should be given to unobstructed emissions without throttling. Users should provide the emission amount of the safety valve, exhaust outlet size, exhaust temperature, and takeoff pressure when selecting. Safety valve exhaust silencers are generally selected as through-hole dissipative silencers. The shell of the silencers is generally made of carbon steel, and the connecting pipes and internal materials are made of stainless steel. Small hole injection type mufflers can also be used, which require a sufficiently large emission capacity and cannot generate stuffy pressure or throttling. They are generally made of all stainless steel.

Note: The selection of silencers should be based on fire, moisture, corrosion resistance, cleanliness requirements, installation space location, noise spectrum, natural sound attenuation, air flow regeneration noise, room allowable noise, allowable pressure loss, equipment location, and other factors, and may be biased according to the actual situation- The general situation is: the larger the consumption of the muffler, the greater the pressure loss and which one it is; When the consumption is the same, the smaller the pressure loss, the larger the space occupied by the muffler.

Silencer -:

-The high anti spray resistance series of muffler equipment is used in power generation, chemical, metallurgical, textile and other industrial plants and mines, and is used for various types of boilers and steam turbine exhaust; Fan; The elimination and lowering of safety doors and other equipment. This series of suppressors and silencers is developed based on the principle of resistance, spray, and resistance composite elimination. They have the advantages of large consumption, small volume, light weight, and easy installation and maintenance.

1. The attenuation frequency of a suppressor muffler, and the effect of an anti spray type suppressor muffler on noise at various frequencies.

2. The applicable wind speed of the muffler is generally 6-8m/s, with a height not exceeding 12m/s, and attention should be paid to the pressure loss of the muffler.

3. Pay attention to the net channel cross-sectional area of the muffler. When connecting the air duct to the muffler, it is necessary to amplify it when there is a limitation on wind speed.

4. The installation of dissipators, silencers, and other dissipating equipment must have a vertical suspension rod or base; The sound equipment must be connected through a soft joint.

4. When two elbows are used in series, the connection distance between the two elbows should be greater than 2.5 times the diagonal length of the elbow section.

5. For environmental systems with high temperature, high humidity, oil mist, and water vapor, microporous junction disinfection equipment is generally used. For environmental systems with cleanliness requirements such as operating rooms, recording rooms, and clean factories, microporous junction disinfection equipment should be used.

6. When adjacent rooms are connected by pipelines, attention should be paid to the mutual influence of indoor noise through the pipelines, and air vents should be treated for noise reduction.

Overview and composition series of small hole eliminators:

Small hole silencers are mainly used in power plants, thermal power companies, petroleum, chemical, steel, metallurgy, papermaking, printing and dyeing, textile and other industrial and mining enterprises. A muffler is composed of different cylinders, and the emitted gas is sprayed into the atmosphere through the acoustic shell with evenly distributed small holes on the outer layer after passing through the inner cylinder's secondary expansion and pressure reduction body. The Tianshi steam exhaust muffler is suitable for steam equipment exhaust noise reduction in boilers, steam turbines, steam generators, steam pipelines, and other thermal systems. Mainly divided into PA series steam safety valves, as well as exhaust valves, release valves, pressure relief valves, and exhaust diffuser silencers; The PD series low-pressure steam exhaust muffler has sub series including PDy series high-pressure deaerator exhaust muffler and PDb series backpressure turbine exhaust muffler; The PB series starts the ignition of the air exhaust diffuser muffler.

Small hole muffler -:

A small hole muffler is a device that can hinder sound transmission and allow airflow to pass smoothly, preventing airflow dynamics and noise. Reasonably compact in structure. Featuring small size, light weight, high strength, and convenient installation and repair. It is a type of noise reduction equipment that controls the emission of exhaust noise. Its noise reduction value is between 32-45dB (A). Make the emission standards comply with the National Industrial Enterprise Noise Hygiene Standards.

Material selection for small hole silencers:

Our company recommends using stainless steel for the small hole muffler and acoustic shell, and the connecting pipe is determined according to the steam working condition of the equipment- The three types of connecting pipe materials used are 20 # carbon steel, 304 (0Cr18Ni9), 321 (1Cr18Ni9Ti \ 0Cr18Ni10Ti) stainless steel, and alloy steel pipes suitable for high temperature and high pressure.

Scope of application of small hole muffler:

Installation of connecting pipes: DN25, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450

Steam working condition: Steam temperature: 104 ℃ -540 ℃, steam pressure: 0.5-13.83MPa

There are various types of steam emission targets for thermal equipment, and our company can design and manufacture corresponding noise reduction equipment that meets operating parameters based on your proposed exhaust volume, steam pressure, steam temperature, and pipe size. Customized combined steam exhaust muffler.

Instructions for ordering small hole silencers:

1. What kind of equipment does the noise reduction object provide

2. Steam exhaust pipe size（ φ×δ< external diameter × Wall thickness>)

3. - Large exhaust steam volume (t/h)

4. Pressure and temperature (MPa, ℃)

Specification and model of small hole muffler:

Selection List of Small Hole Types for Boiler Fire Exhaust Fire Extinguishers

Model description: For example: KD-39-35/15 (over) KD small hole fire exhaust fire extinguisher; 39- Boiler steam - pressure; 35- Boiler evaporation capacity; 15- Exhaust volume